-
×
[PR]上記の広告は3ヶ月以上新規記事投稿のないブログに表示されています。新しい記事を書く事で広告が消えます。
-
Proper lighting in the media room is very important to its overall look and functionality. By incorporating several kinds of lighting, you can add drama, excitement and overall enjoyment to the room. Making some key decisions as to the kinds of bulbs to use as well as the position of the lights can help create a functional as well as enjoyable media room or home theater. If your media room is a bit lacking in lighting options, here are some ways to light it up beautifully.
Designing Unobtrusive Light Fixtures
Even when the lights are out, you'll usually want some form of unobtrusive lighting in the media room. After all, watching movies led street lamp in total darkness can cause eye strain and make it difficult to see your popcorn or candy. Total darkness can also make walking in the media room hazardous, so you'll want to find ways to add unobtrusive lighting for the sake of safety. Using small recessed lighting designed to be mounted on the floor surface can be a great way of creating a safe walkway, even when the lights are out. Adding a cove ceiling to the media room can also be a great way of providing subtle and yet effective decision. When small fixtures are placed within the cove, they will softly illuminate the walls without producing any unpleasant glare, spots or shadows. Overhead recessed type can also be used around the perimeter of the room. When installed in this fashion, recessed lights will softly wash the walls in light, helping you see without disturbing the enjoyment of the movie.
Plan for Easy Light Control
When planning the lighting for a media room, it's important to make sure it's easy to adjust the light levels. Because sometimes you might want a bit more light than others, dimmer switches can be quite handy. By installing a dimmer switch, you'll be able to gradually increase light levels within the room, without the shock of turning on bright overhead lights. You should plan to place the light controls within easy reach, so that you won't have to get up in order to make adjustments. Room lighting that responds to a remote control can be an even more convenient way of being able to adjust the level of light within the room.
Blocking Unwanted Light
In addition to adding the right kind of light to the media room, it's also important to remember that sometimes you will need to block the light. For example, when enjoying movies during the day, blocking the outside light can be an important consideration. In the evening, you'll want to be sure you can block the light from the rest of the house, as well as blocking any glaring outdoor lighting. Blackout shades should be used on the windows, and the media room should always have a door that can be closed. Choosing fabrics that have a low reflective level such as black, deep burgundy, purple or dark blue can also be a good way of subduing existing light.PR -
A major concern just a few years ago (and with some less sophisticated competitors today) was the nature of LED light. The best way to describe it was harsh. It was very intense, blueish/white and stark for lack of a better word. It was hard to get the color of the light right until recently and now we've gone to the point where we can color tune to any Kelvin color. Not to get too scientific but Kelvin is a measure of color's heat temperature. It's what architects think in terms of when they're picking lighting colors. We just received a video of the ability to switch LED light to the 256 primary colors and it's not just a mask but the light color itself that is quickly switching between colors. This is an impressive ability we now have. So how do we evaluate the color of LED light?
There are three main colors of light that are common on the market for different lighting uses. There's first bright light which is more led high mast lamp manufacturers towards the stark side of things. Think of street lights, hospital lights, or outdoor floods where a certain perceived brightness either conveys cleanliness, safety, or just light. The next logical jumping off point is daylight. This light feels more wide spectrum based. Keep in mind that the nature of light is a function of it's wavelength. The problem with old LED's is that they had a very limited range of spectrum that the light operated at. If you show light in only a narrow band of light, it will appear thin or stark. That was the issue originally. Daylight is very different. Light from the sun crosses the entire spectrum (and even on either side of the visual spectrum hence UV and Infra-Red). This large band of spectrum makes sunlight or in the parlance of lighting, daylight very warm even it doesn't appear to have color. It feels good because it's very familiar to us. This works well in many settings such as offices, retail, residence...for that matter...almost any indoor or outdoor setting. The LED version of it is still a bit "white" but that suits many needs ideally. For a warmer light, look at "yellow" light which has a warm feel. This was the holy grail of LED technology and was the last to get right. It feels warmer than daylight and works well in residences, retail, and other situations where the light should be secondary to the actual space itself. Yellow or warm light takes a backdoor to the architectural space and feels "good" to most people.
Our recommendation is to go "warmer" than the name says. Light with more of a "yellow" Kelvin reading will probably address daylight color better when translated by actual eyes. The best approach is to order a sample light from us in the exact form factor you're looking to replace. For example, 2 LED strips may adequately replace 4 fluorescents. It's hard to tell until you see it in the actual space. Below are different examples of lights but keep in mind that the monitor settings itself can affect how these are perceived. You can request samples from us here.
The 2700 Kelvin shows a "yellow light". The 3500 Kelvin shows daylight and the 5500 Kelvin shows white light. We can now color tune LED's to any frequency or Kelvin temparture required. Another Kelvin representation of light quality in an indoor setting. Light can also be described as "Cool" (higher Kelvin temperature reflecting white or blue light to the eye) or "Warm" (lower Kelvin temperature reflecting yellowish hues of light). -
It is hard enough in society today to try and find ways to save money. Costs have skyrocketed everywhere you seem to turn. Mortgages, taxes, food shopping and gas have all gotten more expensive for everyone. With the fragile economy of today, you never even know if you are going to have a job from one day to the next. This means it is in your best interests to save money everywhere you can. One of the best places for you to start is to take a look at your electricity and lighting. Switching your home over to where you can use LED PL light for your lighting can help you save a lot of money.
Many people shy away initially when they hear about LED. The only thing they may think about are those little lights you see on a Christmas tree or the lights on your calculator or alarm clock. Technology, however, has progressed a long way where LED is concerned. There are now wide varieties of lighting options that use LED because companies have seen how efficient it can be for everyone.
The diodes used in this lighting are very small. This means that several of them are needed to be grouped together to get a focused light. This is what is typically done in LED lamp bulbs. Many people find this type of lamp gives off a stronger brightness and glow than what they receive from an incandescent or fluorescent lamp. This could be because in this type of light, the light turns on fast and reaches it full capacity very quickly.
This is because this type of lighting does not rely on an excessive amount of heat to use for its energy. The diodes can quickly convert the electricity into light instead of relying on the heat to help them. This not only means a faster, brighter light, but it also means it is using less energy, a very important quality for you.
Since the lights are using less energy, it means it will cost you less to use it yourself. This can result in a direct savings in your utilities. Since the light uses less energy, it also means that it is going to last for a much longer time. An LED light bulb has been known to last for fifty thousand hours Outdoor Lights Led Street Light or more, which is a great deal more than the standard light bulb most people use. That can lend itself to a great deal of savings for you in having to buy replacement bulbs all the time for your home.
While an LED PL light bulb may seem expensive at first glance, everything needs to be taken into consideration when you are thinking of switching. The cost you must lay out initially will certainly pay for itself over time with the savings you can see on your electric bill. You will also save a lot of money by not having to buy new bulbs for months or maybe even years with your new lighting. -
You may not realize it but LED light bulbs should be considered as appliances. This is because they have been designed to perform a certain task through the use of electricity.
But how is it LED light bulbs may be classified, as an appliance when incandescent or fluorescent cannot be? The reason people are now classifying such bulbs as appliances is because they last longer as they are much more durable, and of course in comparison to other light bulbs these ones are much more energy efficient.
Today LED lights bulbs are considered to be the most energy efficient bulbs you can purchase. On average a good quality LED bulb is able to use up to 92% less energy compared to the bulbs you currently have fitted in your home. As a result this will offer you quite a considerable saving on your annual electricity bills.
Although the initial cost of installing such bulbs comes at a cost, the amount you then spend over the life time of service they offer you are a great deal lower than you get from the incandescent type. Furthermore a large number of these LED light bulbs now come with an Energy Star rating. These ratings are issued in the US by the Environmental Protection Agency and normally are assigned to many different large and small appliances that you will already have in your home.
Historically light bulbs were often seen as a disposable item and this is why they cost so little to purchase. But with improvements in lighting technology it has resulted in LED light bulbs coming with a much longer life span in comparison to the kind of lighting we are using currently. It is this that also has helped to have such bulbs categorized as being appliances instead of being a consumable good.
A large number of these bulbs are now coming with claims that they will provide illumination for 30,000 hours or more. This in turn means that they have a life span of 27 years or more before they need replacing. It is this longer life span that is also helping them to be considered as a durable good like your refrigerator, washing machine or microwave is considered. IP65 60W Led Urban light Plus they are considered more as durable goods as unlike incandescent or fluorescent light bulbs these LED type maintain their value more.
Another feature that is making such these light bulbs increasingly popular is that they use a different type of technology to emit light. In incandescent lights you will find a filament that needs to be heated up in order to emit light.
Yet within LED light bulbs these are fitted with a semi conductor through which electrons then pass to produce the light. The technology used in these bulbs is much more capable of withstanding shock or vibration, making them much more durable and therefore much more reliable. For anyone who wants to save money as well as help to do their bit for the environment replacing your current bulbs with the LED variety should seriously be considered.
-
A chandelier is one of the most elegant fixtures of our homes andoffices. It adds a dramatic effect to the ambience of your home and attracts everyone’s attention to it.If you are considering a glamorous makeover for your home,a chandelier can be your best bet to make it beautiful.
Homeowners consider installing a chandelier as easy as installinga light bulb. But, the reality is different. A chandelier is much heavier than a standard light bulb. If Horizontal only Led Street Lamps not handled with care, it might get damaged or cause injury to someone. There are several important aspects to consider before installing a chandelier, such as:
• Size of the Chandelier
It might sound trivial but it is an important aspect to consider before making a decision. Do not think of a place for installing the chandelier after buying it. Make the decision before visiting the local décor shop. Consider the size of the room as well as the chandelier before making a purchase. If the chandelier is too big or too small for the room, then it will result inwaste of money.
• Weight of the Chandelier
A chandelier is a heavy object of décor. While installing it, there are chances that the ceiling might get damagedbecause of the weight of the chandelier. So, you must be extra careful during the purchase and do a prior check of the ceiling. Buy a heavy chandelier only if the ceiling of your home is capable of holding its weight.
• The Wiring System
Installing a chandelier involves a lot of complex wiring system. If it doesn’t emit the required amount of light, it will not add charm to the place. If there is any error while installing the wiring system, then there are chances of short circuit or fire. To avoid any problems, hire an electrician who will do the wiring work correctly.
• Level of the Ceiling
Another aspect that you should consider while installing a chandelier is the level of the ceiling. If the ceiling is at a low level, there is no point in installing a big chandelier as it will obstruct movement. On the other hand, if the ceiling is at a high level, then purchasing a small chandelier will be useless. It is because it will remain as a tiny object in a big room.
To get rid of all the hassles associated with installing a chandelier, it is better to opt for an electrician. An electrician will know how to fix problems related to the installation work. Thus, it is extremely important to get a reliable and trained electrician.
Hewill ensure that the chandelier is fitted with the appropriate expertise and attention. Before hiring an electrician, make surethat he includes all the total costs in the budget. Remember that the total cost will include the cost of hardware supplies and the labor charges too.Once the work gets over, the electrician must clean the area. You must check the ceiling or the nearby walls for any damage.If there is any damage, ask him to take care of it.
A chandelier is a piece of décor that enhances the appearance of the room. It is an intricate piece of work. It is more than just another light fixture. If you want people to turn their heads up in awe, hire an electrician for installing a chandelier correctly.
